URAWA INDUSTRY
MATSUI UNIVERSAL JOINT CORP.
TOP
Introduction
Products
Quality Assurance
Why URW?
Installation
For Motor Race
FAQ
Contact us
ENGLISH JAPANESE
INSTALLATION
Removing CV Joint Fixing CV Joint How to fill CV joint with grease How to remove shaft
Removing CV Joint
Removing CV Joint:p1 Removing CV Joint:p2 Removing CV Joint:p3
Clamp shaft firmly in a vise. Do not damage shaft by overtightening the vise. Tubular shafts can be damaged by overtightening.   Remove large boot band with pliers, slide cutters or screwdriver.   Remove small boot band in the same manner.
Removing CV Joint:p4 Removing CV Joint:p5 Removing CV Joint:p6
lSlide boot off the joint towards the center of the shaft.   Knock joint off the shaft using a soft hammer(copper or plastic).
The use of a steel hammer could cause the tips to spread out.
  Remove the circlip with a screw-driver.
Removing CV Joint:p7 Removing CV Joint:p8    
Remove the boot.   Clean the shaft.    
PAGE TOP
LINKS SITEMAP
Copyright © 2006 MATSUI UNIVERSAL JOINT CORP. All Rights Reserved.